angle of inclination
英 [ˈæŋɡl ɒv ˌɪnklɪˈneɪʃn]
美 [ˈæŋɡl əv ˌɪnklɪˈneɪʃn]
倾斜角；磁倾角
英英释义
noun
- (geometry) the angle formed by the x-axis and a given line (measured counterclockwise from the positive half of the x-axis)
双语例句
- It can be see from the measured data that the deviation angle of inclination is about 1 40 °, slightly exceeding the permitted value.
现场检测数据显示，该抗风柱基础施工偏差略大于允许值，连接抗风柱的垫板约有140°倾斜。 - Please consult with your local supplier about the best angle of inclination.
关于最佳倾斜角度的具体信息，请咨询当地的经销商。 - The finite element software introduced the bit and established anisotropy of series of angle of inclination formation rock in air drilling. Investigate the mechanism of interaction between bit and formation rock and the procedure of PDC bit breaking rock.
建立了空气钻井中钻头钻进不同地层倾角地层岩石的动态过程的三维有限元仿真模型，并对PDC钻头破岩的过程以及钻头与岩石的相互作用机理进行了研究。 - Practice of using raise boring in excavation of guide hole for shaft with large angle of inclination Construction Technology of Long Curved Hoisting Transportation System in Steep Inclined Shafts
反井钻开挖大倾角斜井导孔的工程实践大倾角斜井长曲线提升机运输施工技术 - The angle of inclination from the vertical of a vein, fault, or lode. Construction Technology of Long Curved Hoisting Transportation System in Steep Inclined Shafts
倾斜余角因矿脉，断层或矿井倾斜而与垂直面形成的角度大倾角斜井长曲线提升机运输施工技术 - Lower and raise the ramp to see how the angle of inclination affects the parallel forces acting on the file cabinet.
把斜坡抬高或放低，看倾斜角度如何影响文件盒上的平行作用力。 - Research on relationship between bone traction and angle of inclination of cross section of shaft bone fracture
骨干骨折断面倾角与骨牵引关系的探讨 - According to the degree in which the original ground surface has been denuded, the magnitude and the angle of inclination of the major principal stress can be calculated ( such as the magnitude of the intermediate principal stress).
根据原始地面遭剥蚀的程度，可以大致地估算最大主应力和中间主应力的量值和方向； - The main function of the inclinometer is to measure the angle of inclination 、 azimuth and tool face angle.
随钻测斜仪的主要作用是完成井斜角、方位角、工具面角等参数的测量。 - The trainer can provide learners the simulant melting rate of electrode, check up whether the moving rate of electrode and the angle of inclination of electrode are in the ranges set in advance.
该装置能给学员提供焊条摸拟熔化速率，能检测焊条移动速率、焊条倾角、焊条与工件间的距离是否在予先设定的范围内。